Introduction

BMW presents the 745i in July 1983:

“More modern technology is hardly possible.”

“The 4-speed automatic electric transmission – the first time in history of the automobile.”

25 thoughts on “Introduction

    1. Y.C.LIN

      hi~ i am happy to see this website,i have e23 1985 745(eu) in Taiwan,my 745 have Rebuilding, if i have question can ask you? thank`s~

      Like

      Reply
  1. Adnan

    Hi Niko,
    I’m Adnan from Bosnia.I have BMW E34 with m106 engine.
    Specifications of engine is:
    * Garrett Gt35 twinscroll turbo
    * Big intercooler
    * 76mm pipes from/to IC
    * Chip tuning from Jarmo Havulinna
    * Adjustable fuel regulator
    * O-Ring headgasket
    * m30b35 head
    * m30b35 intake manifold with throttle on other side
    * exhaust manifold one by one cylinder
    * Turbosmart external wastegate 38mm
    * Two additional fuel injectors in intake
    * Greeddy blow off
    * Two Walbro fuel pumps
    * ….etc….
    Now I buy new fuel injectors and car shoking from idle to 3500rpm because it is to many fuel in that range.I need reprogram this EPROM,how can I reduce fuel in down side before car get in boost.
    Best Regards…

    Like

    Reply
    1. turbobmw Post author

      Hi Adnan,

      You can try free program called tuner pro for changing M106 fuel maps. But i think you would be better of with modern management replacing old factory stuff. Especially if you do not have original automatic in place. With so many nice modifications you are quite off original setup and it can be hard to have it spot on or even close. All the best, Niko.

      Like

      Reply
      1. Adnan

        I need definition file to open it with Tuner Pro.
        File with extension xdf if you have it.
        Best Regards

        Like

  2. turbobmw Post author

    Okay, sorry do not have it. Quick solution is to read and combine binaries from both chips and use it as single 64K file. When done modifying split it two again and make new eproms. Good luck !

    Like

    Reply
  3. Tommy Vlahos

    Hi Niko !!
    Hope your well,
    We’ll car was running great thanks to your help, and now the lower radiator hose destroyed the head gasket and warped the head….
    Any recommendations for the up grade and place to order from or any parts you may have?
    Thanks
    Tommy
    Nyc

    Like

    Reply
    1. turbobmw Post author

      Hi Tommy!

      Nice to hear from you, i am glad you sorted all car issues.

      Check ebay.com for second cyl. head, usually there is at least one for sale.

      I will email you bit later with more details.

      You’re most welcome
      Niko

      Like

      Reply
      1. roberto

        I’ really interested in the ECU you have for sale, please get back to me in my email if it is still available. thanks

        Like

  4. JP

    Hi everyone !
    I wonder if lead substitute is needed inside a M106
    engine?
    Mine is stock with 220 000 km.
    Previous owner use this product so far.
    Thank you very much.
    JP

    Like

    Reply
    1. turbobmw Post author

      Hi JP!

      Here is copy of Service-page, see more there:

      If head is manufactured on or after september 1984, substrates are not needed according to BMW technical bulletin.

      You’re welcome,
      Niko

      Like

      Reply
      1. JP

        Thank you again
        As it is a 1984 mod I need to find the production month to be sure.
        By the way, I only put unleaded fuel inside the other big six BMW that I have without any problem so far, it is a 3553cc 1979 6er.
        But special valve requires special features I guess on stelit (I believe) exhaut valves of the M106.
        Just thoughts…
        Best,
        JP

        Like

      1. JP

        I will the check the production period on the cylinder head.
        However the “memory effect” of lead left over the valve seats is a tremendously interesting fact!
        I will no longer worry about that while enjoying the endless torque sensation of this brilliant engine.
        Great to have this informations Niko !
        Thanks a lot.

        Like

Leave a Reply to mack ayr Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s